This carrier is designed for those who wish to take their mobility scooter or power wheelchair with them on trips but do not have the room to put the scooter in their car, van or SUV. This carrier's long ramp allows an able companion to roll the scooter up the ramp. The carrier can be stored in the upright position when not in use and can be stored in multiple tilted positions.

 
 
 

Email Address :
Password :
Forgot Password?
 

  VersaHaul Manual Carrier / Transport Lift - VH-MS  
 
Product » Lifts & Carriers » VersaHaul » VersaHaul Manual Carrier / Transport Lift
 
Click Here to View Larger Image
Retail price: $925.99
 
   Lifting Capacity :500 Lbs
 

This carrier is designed for those who wish to take their mobility scooter or power wheelchair with them on trips but do not have the room to put the scooter in their car, van or SUV. This carrier's long ramp allows an able companion to roll the scooter up the ramp. The carrier can be stored in the upright position when not in use and can be stored in multiple tilted positions.
 
  
 
Folds into a flat position when not in use
 
a Friend about this product

 
     

Mobility Scooter Carrier XL
VH-MS XL

 

PRODUCT INFORMATION


Features

What′s Included

Specifications

  • 60 in. center folding ramp
  • Ramp easily lock into a folded upright position with spring pull locks
  • Ramp folds into a flat position when not in use
  • Ramp can be removed
  • Carrier tilts up when not in use.
  • Carrier comes standard with class III hitch insert.
  • 13 slots for tie down hooks
  • Tough powder coat finish
  • Tray has a 58.75 in. x 32.75 in. of carrying area
  • Model Number: VH-MS XL
  • Description: XL Mobility Scooter carrier  
  • Approx. Shipping Wt.: 120 lbs.
  • Carrying Capacity Unit: 500 lbs.
  • Length of carrier tray: 60 in.
  • Width of carrier tray: 33 in.
  • Height of carrier tray: 6.5 in.
  • Length of ramp: 60 in.
  • Width of ramp: 32.6 in.


LIMITATIONS


Carrier

Hitch

Vehicle

The VH-MS XL carrier is designed to safely carry 500 lbs. Most Class III hitches are rated for 500 lbs.
Most Class IV hitches are rated for 1000 lbs.
Your hauling weight may be limited by your vehicle′s capacity to carry a load.

Click here to find the Carrying Capacity of your vehicle.


LIMITATIONS


Carrier

Hitch

Vehicle

The VH-MS carrier is designed to safely carry 500 lbs. Most Class III hitches are rated for 500 lbs.
Most Class IV hitches are rated for 1000 lbs.
Your hauling weight may be limited by your vehicle′s capacity to carry a load.



Mobility Scooter / Powerchair Carrier
VersaHaul model VH-MS

 
This carrier is designed for those who wish to take their mobility scooter or power wheelchair with them on trips but do not have the room to put the scooter in their car, van or SUV. This carrier′s long ramp allows an able companion to roll the scooter up the ramp. The carrier can be stored in the upright position when not in use and can be stored in multiple tilted positions.

The Versa-Haul Mobility Scooter Carrier allows you to haul your Mobility Scooter without the need for a trailer. Simply slide the carrier into your Class 2, 3, or 4 trailer hitch receiver tube and secure with your hitch pin and clip. The carrier comes with an adapter to enable it to fit a 1-1/4" or a 2" x 2" square receiver. Put your mobility scooter on the carrier and secure it with your tie downs using the tie down slots on the carrier. (Tie-downs not included.) It does not touch the road and does not require light hook-ups, registration, or the added expenses of maintaining a trailer, and it is easier to store. Each Versa-Haul carrier also has a unique locking device which locks it to your vehicle′s hitch, eliminating carrier sway. The Mobility Scooter Carrier is made from high quality steel, and comes with a 1 year warranty. The 60 inch long removable loading ramp is included, and easily locks into different positions with spring pull locks, and stores flat on the carrier as shown in the photo. This carrier is designed to have clearance to fit on a car or truck with or without a rear mounted spare tire rack.



PRODUCT INFORMATION

Features

What′s Included

Specifications

  • 60 in. center folding ramp
  • Ramp easily lock into a folded upright position with spring pull locks
  • Ramp folds into a flat position when not in use
  • Ramp can be removed
  • Carrier tilts up when not in use. This carrier has multiple tilted positions.
  • Carrier comes standard with both class II and class III hitch inserts.
  • 14 slots for tie down hooks
  • Tough powder coat finish
  • Tray has a 47.75 in. x 27.75 in. of carrying area
  • Model Number:VH-MS
  • Description:   
  • Mobility Scooter carrier  
  • Approx. Shipping Wt: 115 lbs.
  • Carrying Capacity Unit: 500 lbs.
  • Length of carrier tray: 49 in.
  • Width of carrier tray: 28 in.
  • Height of carrier tray: 6 in.
  • Length of ramp: 60 in.
  • Width of ramp:27.5 in.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
LIMITATIONS

Carrier

Hitch

Vehicle

The VH-MS carrier is designed to safely carry 500 lbs. Most Class III hitches are rated for 500 lbs.
Most Class IV hitches are rated for 1000 lbs.
Your hauling weight may be limited by your vehicle′s capacity to carry a load

 

 

 

 

 

 

 

 

 

Optional Accessories

Versa-Haul Heavy Duty Hitch Bracket 

The Versa-Haul Heavy Duty Anti-Tilt Hitch Bracket fits a 2" square receiver,
and will help eliminate carrier and draw bar sway in heavy duty applications.

Simply slide the Hitch Bracket on your carrier or draw bar before inserting the carrier into the receiver tube of your hitch. Put your carrier or draw bar in your hitch and secure it with your hitch pin and clip. (hitch pin and clip not included). Place the Hitch Bracket over your hitch receiver tube so the three bolts align with the carrier and tighten the bolts. This unique locking device locks your carrier or draw bar to your vehicle′s hitch, eliminating sway in heavy duty applications. The Hitch Bracket is made from high quality steel, and comes with a 1 year warranty.

Versa-Haul Hitch Riser for a Class 3 Hitch

The Versa-Haul Class 3 Hitch Riser will raise your hitch mounted carrier approx 4 inches above the level of your hitch.

On some vehicles your hitch is low. This could cause the tail of the carrier to drag as you are starting to go up a steep incline such as a steep driveway or high sidewalk Simply slide the Hitch Riser into your 2" x 2" square Class 3 trailer hitch receiver tube and secure with your hitch pin and clip. Put your carrier in the top tube of the Hitch Riser and secure it with your hitch pin and clip. (hitch pin and clip not included). The extra rise provided by the Hitch Riser will help keep the tail of your carrier from dragging in extreme conditions as described above. The Hitch Riser also has a unique locking device which locks it to your vehicle′s hitch, eliminating carrier sway. The Hitch Riser is made from high quality steel, and comes with a 1 year warranty.

Draw Bar Hitch Pin and Clip
Trailer receiver draw bar hitch pin and clip fits 2" ID square receivers.
VersaHaul tail light kit VH-TK

VersaHaul tail light kit VH-TK

Stop, turn, and tail

  • 2 taillights
  • 2 in. x 2 in. x 50 in. holding shaft
  • 1 wire harness
  • 3 vinyl harness clips
Weather Cover

Heavy Duty / Deluxe Cover

for Scooters or Powerchairs and more..

 

 

Helpful Information:
* Hitch Receivers sizes Not sure what a 2" x 2" square receiver or class 3 hitch receiver is?
 


(also called a 2" x 2" square receiver hitch)

(also called class 3 or class III receiver hitch)

 
 

What is a 2" square or class 3 receiver hitch? Your trailer hitch has a 2" square receiver if the inside measurement of the opening on the hitch where the drawbar goes is 2" x 2" as shown in the drawing. Your hitch will accept the products on this website that are made for 2" square receivers such as the Hitch-Mounted carriers fscooters, powerchairs...etc.

If you have a class 2 hitch receiver, it means the square receiver measurement is an inch and a quarter (1.25 " inches)

Most carriers are made for class 3 or 2" receivers hitches. If your hitch is a class 2 hitch receiver, you will need an adaptor to switch the class 2 into a class 3. We sell adaptors with most carriers or you can consult with your local hitch installer/ dealer.


**NEVER exceed your vehicles carrying capacity or trailer hitch capacity. Most Class II hitches are typically rated at 350 lbs, Class III hitches are 500 lbs (Please refer to capacity sticker on the trailer hitch). Some vehicles may require air shocks or other modifications to the vehicles suspension. Please check your owners manual for vehicle hauling capabilities.

Information on this page is intended as a guide only, and does not cover installation and function of every application of the subject discussed, but is only intended to supply information on the basic function.

*Mobility Programs Click here to learn more about lifts, carriers and Ramps rebates + Mobility Programs (Get Money Back from your car dealership when you buy a new vehicle and install a lift or carrier into it from us)
 

 
     
 
 
 
Terms and Conditions | Add To Your Favorites  | Refer A Friend | Payment Choices
Found a lower price? | Product Catalog | Site Map
© MobilityAmerica.com 2004-2005