The AL065 Micro Inside-Out Lift mounts on a vehicle hitch but loads your power chair or scooter inside the vehicle. Featuring a 200 pound lifting capacity, this micro lift is the perfect solution to provide inside lift capabilities to vehicles that cannot accomodate an inside lift.

 
 
 

Email Address :
Password :
Forgot Password?
 

  Micro Inside-Out Lift AL065 - AL065  
 
Product » Lifts & Carriers » Harmar Mobility » Micro Inside-Out Lift AL065
 
Click Here to View Larger Image
Retail price: $999.00
 
   Lifting Capacity :200 Lbs
 

The AL065 Micro Inside-Out Lift mounts on a vehicle hitch but loads your power chair or scooter inside the vehicle. Featuring a 200 pound lifting capacity, this micro lift is the perfect solution to provide inside lift capabilities to vehicles that cannot accomodate an inside lift.
 
  
 
Attaches Outside and Load scooter inside
 
a Friend about this product

 
     

    lifting Capacity
    200 lbs
    Weight of Lift
    35 lbs
    HeadRoom Required
    37 "
    Power Lift
    Yes
    Power Base
    No
    Lifting Height
    Up to 44"
    Range of Arm
    100 degrees
    Shipping Weight
    45 lbs
 

Harmar AL065  Micro Inside-Out Lift

Harmar′s lineup of quality Micro Lift Systems makes transporting your micro or travel

 mobility device a breeze.

Designed to combine quality with budget, we offer a solution for virtually every

application.

The AL065 Micro Inside-Out Lift mounts on a vehicle hitch but loads your power chair

or scooter inside the vehicle. Featuring a 200 pound lifting capacity, this micro lift is

 the perfect solution to provide inside lift capabilities to vehicles that cannot

 accomodate an inside lift.

Specifications:

Weight Capacity:    200 lbs.
  Installed Weight:    35 lbs.
  Shipping Weight:    45 lbs.
  Lifting Height:    Up to 44"
  Range of Boom:    100 Degrees

                Hitch Class                                           II or III

 

This design attaches outside the vehicle to the hitch, and uses power to vertically lift

scooters and light power chairs for manual rotation into the vehicle.

The unit requires wiring to your vehicle battery, and the unit itself attaches to a

class II or III hitch. Completely weather resistant construction.

  • Unit Weight 35 Lbs.
  • Boom Length 35"
  • Total Height 40.5"
  • Length of Base 37.5"
  • Overall Post Height 37"

 

Features:

  • Remote Hand Control
  • Lightweight Components Disassemble for Trunk Use
  • No need to bolt this lift to the vehicle!
  • Works for most scooters and some lightweight power chairs.
  • Attaches to the hitch. Easily removed for storage.
  • Disassembles into three pieces for easy storage.
  • Weighs 35 lbs.

Options

Optional "C" Arm Part # DD19 used to lift scooter or powerchair base without
having to remove seat. For Power Chairs and scooters with seat Post.
 
Lift comes standard with a Docking Device
 

 

Click Here to Download and Read the Owner′s Manual

 

FAQ:

Q: Is my lift weather resistant?
A: Yes. The lift is designed to be fully weather resistant and designed to withstand outdoor

 use. The remote hand controls available with some models, however, are not weather

 resistant and must be removed and stored inside the vehicle.



Q: Can one lift be moved between two different vehicles?
A: While it is possible to move a lift from one vehicle to another, it is not recommended

 to do so frequently. If two different vehicles will be used often, we recommend having

 a lift installed on each vehicle.



Q: What maintenance must be performed to keep the lift operating properly?
A: All Harmar Mobility products are designed and tested to operate flawlessly for years

 of trouble-free use with very little maintenance.

Please refer to the Owners′ Manual for specific product maintenance schedules.



Q: Can the lift be plugged into the existing wiring on my vehicle?
A: No, all Harmar Mobility lifts must be powered by the supplied electrical harness.

The harness has full-length leads that attach directly to the battery.



Q: The lift is powered by my vehicle’s battery; what if my car looses power?
A: Many Harmar lifts have standard backup systems that allow them to be moved manually

by Harmar Mobility Authorized Dealers and qualified mechanics such as roadside assistance

 technicians. Harmar Mobility recommends that end users should not attempt to use the

 manual override feature.



Q: Can I carry both a power chair and a scooter on this lift?
A: Yes, this lift is designed to accommodate either a power chair or a scooter.


Q: What is a docking device and is it required?
A: A docking device is used to connect your mobility device to the lift and is required

 for all Inside Lift Systems. They are available to accommodate virtually every scooter

 and power chair available. A Harmar Mobility Authorized Dealer will assist you in finding

 the correct docking device for your specific application.

 
     
 
 
 
Terms and Conditions | Add To Your Favorites  | Refer A Friend | Payment Choices
Found a lower price? | Product Catalog | Site Map
© MobilityAmerica.com 2004-2005