AL430 Tri-Powered Inside Lift
The all new AL430 Tri-Powered Inside Lift is a tri-motor, 400 pound capacity inside lift
that combines powered lifting and rotation with a 12” powered telescoping boom.
This additional reach and a compact design make the AL430 a perfect solution for
smaller rear door openings and side door minivan applications.
For ease of use, the AL430 utilizes Harmar’s exclusive “In and Out” design, requiring
just two simple steps to operate the lift’s three motors.
Harmar’s universal lift design makes this a highly adjustable lift that can be easily
installed in either the driver or passenger side of a vehicle and arrives fully assembled.
Standard features include and integrated offset post, stylistic covers on both the base
and boom and remote hand control.
Features:
Fully powered lifting, rotation and power telescoping boom
Only 30" of headroom required
Extremely adjustable base and boom
Mounts on either side of vehicle
4 Button Hand Control
Removable hook
Free Docking Device
Specifications:
| Lifting Capacity |
400 lbs |
| Powered Rotation |
Yes |
| Powered Boom |
Yes |
| Adjustable Boom Height |
30" - 40" |
| Adjustable Boom Length |
12" - 36" |
| Adjustable Boom Pitch |
0 - 30 deg |
| Adjustable Rotation Limit |
Yes |
FAQ′s
|
Q: Is this lift compatible with my vehicle?
A: Harmar Mobility′s knowledgeable authorized dealers will be glad to discuss your
needs and recommend the proper lift for your application. |
|
Q: Can one lift be moved between two different vehicles?
A: While it is possible to move a lift from one vehicle to another, it is not recommended
to do so frequently. If two different vehicles will be used often, we recommend having a
lift installed on each vehicle. |
|
Q: What maintenance must be performed to keep the lift operating properly?
A: All Harmar Mobility products are designed and tested to operate flawlessly for years
of trouble-free use with very little maintenance. Please refer to the Owners′ Manual
for specific product maintenance schedules. |
|
Q: Can the lift be plugged into the existing wiring on my vehicle?
A: No, all Harmar Mobility lifts must be powered by the supplied electrical harness.
The harness has full-length leads that attach directly to the battery. |
|
Q: The lift is powered by my vehicle’s battery; what if my car looses power?
A: Many Harmar lifts have standard backup systems that allow them to be moved
manually by Harmar Mobility Authorized Dealers and qualified mechanics such as
roadside assistance technicians. Harmar Mobility recommends that end users should
not attempt to use the manual override feature. |
|
Q: Can I carry both a power chair and a scooter on this lift?
A: Yes, this lift is designed to accommodate either a power chair or a scooter.
|
|
Q: What is the difference between the AL410 and the AL420?
A: The AL410 features powered lifting but manual rotation, while the AL420 has
powered lifting as well as powered rotation. |
|
Q: What is a docking device and is it required?
A: A docking device is used to connect your mobility device to the lift and is required for
all Inside Lift Systems. They are available to accommodate virtually every scooter and
power chair available. A Harmar Mobility Authorized Dealer will assist you in finding the
correct docking device for your specific application. |
